China high quality Advanced Motion Controls Silent Servo Motor OEM

Solution Description

 Advanced Movement Controls Silent Servo Motor

57IV90/57IV130/57IV180 Characteristics
one.Functioning voltage: DC input voltage 15VDC to 50VDC ,suggest voltage is 36V
two.The max steady output existing is 10A, the max peak recent is 22A (3 instances overload capacity) 
3.Appropriate differential or one-finished pulse / route command, have 3 control method of position, speed and torqe
four.Using FOC CZPT position handle technologies and space vector pulse width modulation (SVPWM) shut-loop management engineering
5.The variety of pulses for each cycle (subdivision) can be established by the debug software program or the dial switch setting(electronic gear ratio)
six.Have 3 types of 90w,130w and 180w DC brushless servo motor to select.
7.Have protection of overvoltage, undervoltage, overcurrent and tolerance,and so forth.
8.One / double pulse method, the pulse legitimate edge can be select.
9.The max pulse frequency of handle instruction is 500KHz (factory default is 200KHz)
ten.Pulse, route and enable signal enter interface stage is 4.5 to 28V appropriate
11.With serial RS232 / RS485 debugging perform, but require to use our unique serial debugging cable 
12.Functionality: clean speed, modest overshoot ,modest monitoring mistake, low heat of motor and driver

Driver Model And Assortment Xihu (West Lake) Dis.

Motor Type  57IV90 57IV130 57IV180
Rated power(W) 90W 130W 180W
Vector Maximum Current 16A 18A 22A
Body Length(MM) 106.2 0.five 126.2 0.five 146.2 0.five
Operation Voltage 15-50Vdc,36Vdc recommend 
Overvoltage Protection Voltage 68Vdc±2
Control Method 32 bits DSP vector FOC control technology
Pulse Limit Frequency 500KHz(factory default 200KHz)
Protection Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm
Input Signal  Pulse, direction and enable differential / single-ended interface signal,
interface level 4.5-28Vdc compatible, no need external current limiting resistor
Output Signal  Alarm / in-position signal OC output, the output capacity is100mA, need external
pull-up resistor, the maximum pull up voltage is 24Vdc
Electronic Gear Ratio Default 4000 / rev, through the DIP switch or debug software setting subdivision
(200-51200)
Position Error Control Accuracy ±1 Pulse
Speed Control Accuracy  ±2 rpm
Maximum  Acceleration 100 rpm/ms

Dialing Switch Options

Pulse/Rev. SW1 SW2 SW3 SW4
Default ON ON ON ON
800 OFF ON ON ON
1600 ON OFF ON ON
3200 OFF OFF ON ON
6400 ON ON OFF ON
12800 OFF ON OFF ON
25600 ON OFF OFF ON
51200 OFF OFF OFF ON
a thousand ON ON ON OFF
2000 OFF ON ON OFF
4000 ON OFF ON OFF
5000 OFF OFF ON OFF
8000 ON ON OFF OFF
ten thousand OFF ON OFF OFF
20000 ON OFF OFF OFF
40000 OFF OFF OFF OFF

Subdivision accuracy (digital equipment ratio) :When SW1, SW2, SW3, SW4 are ON, the travel makes use of the interior default micro-stage subdivision, the default internal subdivision of the driver is 400Pulse / rev, and the electronic equipment ratio can also be set by the debugging software program. SW5 established the motor direction,when turnON, the motor turns clockwise (CW),when change OFF, the motor turns counterclockwise(CCW). SW6 handle manner selection, whenON, the motor enters the self-take a look at method,creating 1 ahead and reverse revolution, has been recurring right up until exit self-take a look at method, the exterior manage sign is invalid at self test method, whenOFF, the motor exits self-examination mode,then the exterior manage signal is valid.

Mechanical Construction Dimension

 Driver mode Motor body length(mm) Driver thickness(mm) Integrated motor driver length(mm)
57IV90 76 thirty.two 106.two
57IV130  ninety six thirty.2 126.two
57IV180  116 thirty.2 149.two

Notice : All previously mentioned is typically used, and we can customize in accordance to your request or select the suitable model for you, please tell us adhering to parameters: present, voltage, holding torque, body length,the software area.

Application
Appropriate for all kinds of little and medium-sized automation equipments and devices. Such as: laser tools, health care gear, 3D printer, small and medium-sized engraving device, electronic processing gear, automated crawling tools, particular CNC machine resource, packaging products and robot. It is especially valuable for customers who count on reduced noise and higher pace apps.

Packaging and delivery
1.Outer packing: Normal export carton with needed transport marks
2.Inner packing: Water-resistant packing with shock absorbing EPE and cardboard surrounded 
3.As for every the consumers needs

Our provider
1.Operating time : 8:00 a.m – ten:00 p.m .Any questions, please tell us freely, we will be reply you asap.
2.Lead time : For samples, 2 to 5 times will be Ok. For mass creation, the direct time depend on the quantities you need to have.
three.Warrantity interval : eighteen months and Existence-lengthy main10ance services for the solution.
4.We acknowledge items personalize.

FAQ
Q1: How to choose the appropriate stepper or servo motor?
A1: There are serveral crucial items: measurement, duration, keeping torque, voltage, present and so forth.Following validate them and advised us, we can pick the ideal 1 for you.

Q2: Any other methods to finalize the design?
A2: Positive, you can deliver us the design you are utilizing, we can support you uncover the appropriate 1.

Q3:How to promise the Good quality of Industrial Components?
A3: We have the built-in method for industrial components top quality manage. We have IQC (incoming quality control), IPQCS (in method quality manage section), FQC (final quality management) and OQC (out-going quality manage) to management each process of industrial components prodution.

This autumn:What’s the Advantage of Your Areas for Business Items? 
A4:1.The advantage of our goods is the competitive costs, fast delivery and large good quality. Our
workers are responsible-oriented, helpful-oriented,and diligent-oriented. Our products are highlighted by strict tolerance, clean end and prolonged support time.
two.Ahead of we send out out the merchandise,we check out them more than 3 occasions.

Contact

 

An AC motor is a type of motor that makes use of the phenomenon of electromagnetic induction. AC electricity drives the motor. It is a current that periodically reverses course and adjustments its magnitude of the existing in excess of time. This existing is the reverse of a immediate recent or “DC” which flows in only a single course. AC motors can give a reasonably successful way to produce mechanical energy from a simple electrical input signal.
The rotor of a reluctance motor consists of a sound cast metal part with a convex toothed rack. Their starting up method is similar to an induction motor, but it operates like a synchronous motor. Usually, their rotors have fewer poles than stators, which minimizes torque ripple and prevents excellent pole alignment, as no torque is made in that spot. Reluctance motors assortment in electrical power rankings from a handful of watts to about 22 kilowatts.

China high quality Advanced Motion Controls Silent Servo Motor     OEM